GATE 1-Month Plan
A complete 30-day plan covering 40 highest-weightage topics — prioritised by subject weight, not alphabet. No signup, no fees.
- Days
- 30
- Topics
- 40
- Subjects
- 3
- Phases
- 2
How to actually use your 30 days
A single full pass plus targeted revision of your weak areas — one demanding month.
This 1-month plan gives you 30 days to work through 40 weighted GATE topics across 3 subjects — roughly 1.3 new topics a day at 5–6 hours of focused study. That is a demanding but realistic daily load for a one-month working timeline.
GATE marks are not spread evenly across subjects. Subject-Specific, Engineering-Maths, and General Aptitude carry the heaviest weightage in recent papers, so this plan front-loads them — so they are mastered in the first fortnight and the lighter subjects fill the rest. Cover weight 3–5 topics thoroughly. Give weight 1–2 topics a single light reading in your final week rather than skipping them outright.
30 days lets you cover the full GATE syllabus once at a steady pace, then circle back to whatever stayed shaky. At this pace it is tempting to chase coverage and never revise. Protect the weekly consolidation day — it is what makes the pass stick.
What to prioritise & cut
Cover weight 3–5 topics thoroughly. Give weight 1–2 topics a single light reading in your final week rather than skipping them outright.
Mock tests & revision
From the second week, sit one full-length mock every week and analyse it fully before moving on — analysis matters more than the score.
Weekly rhythm
Each week: 5 days new topics, 1 day consolidating that week, 1 day mock + review. Keep a running error log.
Phase-by-phase plan
4 weeks totalA 30-day plan only works when you sequence it. Here is how the 1-Month Plan breaks down — foundation, depth, then mocks.
- 1
Foundation pass
3 weeksCover full syllabus once, weight-sorted
Daily ~3 topicsShort notes per topicEnd-of-week recap - 2
Mock + revision
1 weekTwo full-length mocks + targeted revision
Mock 1 + analysisMock 2 + analysisWeak-area drill
Week-by-week schedule
| Week | Days | Topics covered |
|---|---|---|
| 1 | 1–7 | Engineering-Maths: Linear Algebra (w3)Subject-Specific: Thermodynamics — Laws and Applications (w3)General Aptitude: Number System and Simplification (w3)Engineering-Maths: Numerical Methods (w3)Subject-Specific: Thermodynamic Cycles and Steam Turbines (w3)General Aptitude: Ratio, Proportion and Percentage (w3)Engineering-Maths: Differential Equations (w3)Subject-Specific: Heat Transfer — Conduction (w3) |
| 2 | 8–14 | General Aptitude: Time, Work and Distance (w3)Engineering-Maths: Higher Order Differential Equations (w3)Subject-Specific: Heat Transfer — Convection and Radiation (w3)General Aptitude: Data Interpretation (w3)Engineering-Maths: Partial Differential Equations (w3)Subject-Specific: Manufacturing Engineering — Casting and Welding (w3)General Aptitude: Logical Venn Diagrams (w3)Engineering-Maths: Complex Analysis (w3) |
| 3 | 15–21 | Subject-Specific: Manufacturing Engineering — Machining and CNC (w3)General Aptitude: Analytical Reasoning (w3)Engineering-Maths: Probability and Statistics — Distributions (w3)Subject-Specific: Machine Design — Stress Analysis (w3)General Aptitude: Statistics and Probability Basics (w3)Engineering-Maths: Joint Distributions and Sampling Theory (w3)Subject-Specific: Machine Design — Bearings and Gears (w3)General Aptitude: Coding and Series Patterns (w3) |
| 4 | 22–28 | Engineering-Maths: Numerical Methods — Root Finding (w3)Subject-Specific: Theory of Machines — Kinematics (w3)Engineering-Maths: Numerical Methods — Interpolation and Integration (w3)Subject-Specific: Theory of Machines — Dynamics (w3)Engineering-Maths: Numerical Methods — Linear Systems and ODEs (w3)Subject-Specific: Strength of Materials — Axial and Torsional Loading (w3)Engineering-Maths: Fourier Series and Transform Methods (w3)Subject-Specific: Strength of Materials — Beams and Columns (w3) |
| 5 | 29–30 | Subject-Specific: Fluid Mechanics — Fluid Statics and Kinematics (w3)Subject-Specific: Fluid Mechanics — Flow Through Pipes and Hydraulic Machines (w3)Subject-Specific: Engineering Mechanics — Statics (w3)Subject-Specific: Engineering Mechanics — Dynamics (w3)Subject-Specific: Control Systems — Transfer Function and Block Diagrams (w3)Subject-Specific: Control Systems — Time and Frequency Response (w3)Subject-Specific: Electrical Machines — Transformers (w3)Subject-Specific: Electrical Machines — DC Machines and Induction Motors (w3) |
Subject-wise topic split
Each topic shows its weightage (1–5 dots) and the concepts you'll cover. Higher-weight topics appear first.
Engineering-Maths
12 topics- Linear Algebra ●●●○○
- Numerical Methods ●●●○○
- Differential Equations ●●●○○
- Higher Order Differential Equations ●●●○○
- Partial Differential Equations ●●●○○
- Complex Analysis ●●●○○
- Probability and Statistics — Distributions ●●●○○
- Joint Distributions and Sampling Theory ●●●○○
- + 4 more topics on the full roadmap →
Subject-Specific
20 topics- Thermodynamics — Laws and Applications ●●●○○
- Thermodynamic Cycles and Steam Turbines ●●●○○
- Heat Transfer — Conduction ●●●○○
- Heat Transfer — Convection and Radiation ●●●○○
- Manufacturing Engineering — Casting and Welding ●●●○○
- Manufacturing Engineering — Machining and CNC ●●●○○
- Machine Design — Stress Analysis ●●●○○
- Machine Design — Bearings and Gears ●●●○○
- + 12 more topics on the full roadmap →
General Aptitude
8 topics- Number System and Simplification ●●●○○
Integers, fractions, decimals, squares and cubes, square roots, cube roots, BODMAS rule, divisibility rules, LCM and HCF, and simplification of numerical expressions — foundational arithmetic for VITEEE quantitative section.
- Ratio, Proportion and Percentage ●●●○○
Ratio and proportion (direct and inverse), percentage calculations, profit and loss, discount, simple and compound interest, partnership, and mixture/alligation problems — practical arithmetic applications.
- Time, Work and Distance ●●●○○
Work efficiency, pipes and cisterns, upstream/downstream problems, average speed, relative speed, train problems, and time-distance graphs — time management in work-rate and motion problems.
- Data Interpretation ●●●○○
Interpretation of bar graphs, pie charts, line graphs, tables, and caselets — extracting meaningful information from data representations and making calculations based on presented figures.
- Logical Venn Diagrams ●●●○○
Venn diagram representation of sets, relationship between groups (union, intersection, complement), and solving logical problems using Venn diagram visualization — spatial reasoning in set theory.
- Analytical Reasoning ●●●○○
Data sufficiency, direction-based puzzles, ranking and sequencing, and complex logical deduction problems — reasoning through multi-step analytical problems without formal mathematical calculations.
- Statistics and Probability Basics ●●●○○
Mean, median, mode, range, variance, standard deviation, and basic probability (coin, dice, card problems) — introductory statistical reasoning and chance calculations.
- Coding and Series Patterns ●●●○○
Number series, alphabet series, alphanumeric patterns, and letter-number coding-decoding — identifying underlying patterns to find missing or next terms in sequences.
Why a 30-day plan beats a 1,200-page prep book
| Dimension | Typical GATE book | This 1-Month Plan |
|---|---|---|
| Time to start | Hours of reading before any study starts | Seconds — plan is already here |
| Personalisation | One-size-fits-all | Fits exactly your 30 days |
| Freshness | Printed months ago | Updated for the 2026 cycle · verified 2026-05-30 |
| Weightage signal | Author guess | Derived from last 5 years' papers |
| Cost | ₹500–2,500 | ₹0 |
| Sign-up required | Often (with a trial trap) | None |
Other GATE plans
GATE 1-Month Plan — common questions
Is 30 days enough to prepare for GATE? +
30 days lets you cover the full GATE syllabus once at a steady pace, then circle back to whatever stayed shaky. The honest answer depends on your starting point, but this 1-month plan is built to get the most from the time you have: a single full pass plus targeted revision of your weak areas — one demanding month.
How many hours a day does this GATE 1-month plan need? +
Plan for 5–6 hours of focused study, covering about 1.3 new topics a day. Each week: 5 days new topics, 1 day consolidating that week, 1 day mock + review. Keep a running error log.
What should I skip if I am short on time? +
Cover weight 3–5 topics thoroughly. Give weight 1–2 topics a single light reading in your final week rather than skipping them outright.
When should I start mock tests on this plan? +
From the second week, sit one full-length mock every week and analyse it fully before moving on — analysis matters more than the score.
Already know the pattern? Generate a topic-by-topic plan.
The full personalised roadmap covers weak topics first, tracks completion, and adapts as you mark topics done.
Generate Personalised Plan →